Cable heads are widely used in industrial and mining enterprises, especially in power plants. With the development of science and technology and the needs of industrial and agricultural production, more and more types of cable heads are often used. Paper-impregnated insulated cable end, plastic insulated cable end.
Environmental requirements for the production of cable heads: The production of cable heads must be carried out in clear weather and dry air. The construction site should be clean and free of flying dust or paper debris. Requirements for cables during production The appearance of the produced 10kV cables should be clean and undamaged, and insulation resistance and DC withstand voltage tests should be carried out. They can only be carried out after passing the test. Use sealant to seal the cable heads that have been postponed!

　　Cable head production steps: strip the outer sheath, steel armor and inner lining layer. Straighten the cable, wipe it, and peel off the outer sheath from the installation position to the terminal. Leave the steel armor 30mm and the inner sheath 10mm, and wrap the steel armor with wire or PVC tape to prevent loosening. The end of the copper shield is tightly wrapped with PVC tape.