Stainless steel cable ties are stainless steel products, mainly used for industrial binding and fixing. Because it is made of stainless steel, it has the characteristics of corrosion resistance of stainless steel to chemical corrosive media (such as acid, alkali, salt). At the same time, the stainless steel cable ties are not limited by the shape and size of the objects bound by the quilt. The simple fastening structure simplifies the complexity of the traditional hoop. The good tightening performance ensures the safety of the objects bound by the quilt. The stainless steel cable ties are anti-corrosion and resistant. High temperature materials ensure environmental protection, beauty and fire protection requirements; Self-locking stainless steel cable ties are simple in structure but widely used. In manufacturing, cable ties are used for cable routing in equipment and workshops, and large cable ties are used to secure pipes and machines. In daily life, computer cables are placed, buckles are fastened, ropes are tied, etc. , all can be done with straps. It seems that the tie is easy to use, but it also requires skill when tightening and removing it, especially when removing it. Most people choose to cut directly with scissors, wasting the cable ties. 1. Selection of self-locking stainless steel cable ties 1. Estimate the length of the cable tie required according to the diameter of the object to be bundled (diameter * 5, generally just right, it doesn’t matter if it is longer, not short). 2. Choose the width of the tie according to the strength required for quilt binding. Generally speaking, 3mm can withstand a pulling force of about 7kg, 4mm is about 15kg, and 5mm is about 20kg. . . 3. Check whether the cable ties have burrs, whether the sawtooth is complete and neat, and whether the lock at the perforation is defective. 4. Compared with tying, it really takes a lot of brains to remove a tie. Most people directly choose the simple and rude way – scissors. In fact, all you need is a small screwdriver. Remind everyone that if the puncture head can see the serrations inside to prevent it from falling off, we need to use a screwdriver in the middle of the serrations. After the self-locking stainless steel cable ties are removed, they can be reused.